Tzumi Aura Led Remote Programming Codes (2024)

FAQs

How do I know which universal remote code to use? ›

You can view a list of universal remote control codes in the on-screen menu. The brand name is often visible on the front of the universal remote control, and the model number is often visible on the back.

When it's done, all you have to do is pair the receiver and the remote. To accomplish that, simply long-press the button on the receiver's surface until the diode on it lights up. Next, get the remote close to it and long-press the on/off button until the receiver's light flashes. And that's it - yes, it's that easy.

Press and hold the Device button (TV, DVD, Aux, etc.) until its LED stays on. While holding the device button, press and hold the Power button until it lights up. Release both buttons and enter the first brand code using the remote's keypad; the device button's LED should stay on.

If you do not have a code for your device, then you can: Download and open the One For All Setup App on your smartphone (iOS & Android) and look up for your device. This Setup App gives you the full access to our code database, where you can download the latest codes for your device.

Turn on your TV or another device you wish to control. Press and hold the corresponding Device and Power buttons on the remote at the same time. Wait until the power button comes on, and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

If the remote control or app that controls the LED strips isn't working, it might be a controller problem. Try resetting the controller, re-pairing it with the LED strip, or even replacing the batteries. If the issue persists, it might be time for a new controller.

Here is my suggestions for buying a replacement remote: Buy a replacement from a site like Ebay or Aliexpress. They're the same controllers that come with most LED strips but the markup on the products isn't as high on those marketplaces.

Hold down the item's button.

The item's button will usually have the name of the item for which you want to program the remote written on or under it. For example, if you're programming your remote for the TV, you would hold down the TV button.

How to code a remote control? ›

Program Using Your Garage Door Opener LEARN Button

Locate the LEARN button on the garage door opener. Press and immediately release the LEARN button. The LEARN LED will glow steadily. Within 30 seconds, press the button on the remote control that you wish to operate your garage door.

Turn on your TV or another device you wish to control. Press and hold the corresponding Device and Power buttons on the remote at the same time. Wait until the power button comes on, and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

The good news is: yes, you can use a universal remote with any TV sold today.